+86.21 51097921/51090930
Language
ChineseEnglish

AFB electric brush self-cleaning filter

Your current position:HomeProductAF Series Automatic Self-cleaning FilterAFB electric brush self-cleaning filter

Contact us

Tel:+86.21 51097921/51090930
Manager Li:13306264360
Technical Support:Mr. Feng 15216602964
Email:jci_sales@163.com
Factory address: 368 Qinggao Road, Fengxian District, Shanghai

Brush Type Automatic Industrial Water Filter

  • Product introduction
  • Working principle
  • Technical advantages
  • Application area
  • Specification parameter

1. AFB series is a new type of self-cleaning strainer independently developed by Shanghai JCI with our own intellectual property. It is designed for continuous online filtration to remove impurities on the inner surface of filter screen via highly-efficient mechanical scrapping.

2. AFB Filter can quickly remove impurities from the surface of filtering screens, thus removing more impurities with high efficiency. It applies to the filtration of water and various low viscous liquids. AFB Filter designed and manufactured as per Shanghai JCI's standards for high performance, high quality and high reliability, it features internationally first-class quality.

3. AFB filter always keeps the filter element clean by its advanced self-cleaning mode, and discharge the waste liquid containing high concentration impurities to reduce material waste. It is more obvious efficient to filter water with poor quality and low viscosity liquid . AFB Filter with notable technical advantages and low operation costs, it has gradually displaced the traditional manual filters in various fields, such as vibrating-screen filters, bag filters, basket filters, etc.


For more product information, please consult technical engineer,Tel:15216604123
Filtering status(see figure 1)
Liquid flows inside from the inlet.The liquid flows outwards from the inner surface of the filter screen, and the impurities are intercepted on the inner surface. Then, the liquid flows out from the outlet; with the passage of time, the impurities gradually increase, and differential pressure rises. We can begin to clean the filter screen according to the preset differential pressure or the timing.

Cleaning status(see figure 2)
The motor drives the scraping brushes to rotate horizontally to clean the filter screen. When the brushes rotates, impurities are scraped off and filtered along the filter net to the bottom of the filter, and the impurities with large specific gravity are deposited into the dirty collector. Each cleaning is made up of a number of strokes. After the filter screen is cleaned, the filtering ability is restored. No filtration interruption while self-cleaning.

Discharging status(see figure 3)
After a number of cleaning cycles, impurities accumulate to a certain amount. Regular opening of drain valve, and the waste liquid containing high concentration of impurities is discharged. which can also be recycled, if necessary.
For more product information, please consult technical engineer,Tel:15216604123
 
■ Horizontal rotary scraping, scraping off the impurities directly, is good at filtering viscous liquids and removal of viscous, soft and suspended impurities;
■ Simple structure, easy dismounting; after removing the scraper, easy to take out the filter screen, and easy to clean the inside;
■ Automatic operation, continuous online filtration, to end up the heavy filter screen replacement and cleaning work;
■ Do not produce disposable filter material, saving consumables costs and environmental costs;
■ Small filtration pressure loss, stable flow rate, energy saving is beneficial to the continuous stability of the whole process;
■ Sealed filtration, preventing dangerous material leakage, is advantageous to the safe production and the staff health;
■ Discharge waste liquid with high impurities concentration can be recycled, to reduce the loss of high-value materials;
■ A variety of advanced control systems are optional, powerful, efficient and reliable;
■ Selection of world-renowned brands of components, high reliability, low costs.

Automatic Cleaning Control System
Accumulation of of filter cakes and the blocking of the filter element. When the preset pressure differential is reached, it starts the self-cleaning action. It is suggested that the cleaning pressure differential is 0.1MPa, which can be adjusted within the scope of 0.01-0.1MPa, by the working conditions. Periodically cleaning can be set 0-24 hours, and if the differential mode is inefficient, time pattern still works. It can be considered as the ultimate protection. The cleaning period setting should be close to the average period of the filter pressure differential cleaning mode.


For more product information, please consult technical engineer,Tel:15216604123

 

■ Applicable fluid types: Groundwater, seawater, lake water, reservoir water, circulating cooling water, frozen water, spray water, heat exchanging water, sealing water, bearing cooling water, oil well water injection, craft circulating water, machining coolant, cleaning water, etc.
■ Filtration effect: Constant-value screening, removing large particles, purifying fluid, and protecting key equipment.


For more product information, please consult technical engineer,Tel:15216604123
Technical Parameters & Specifications

Applicable liquid  Water and viscous liquids(?800,000cps); impurity level?1,000ppm
Filter precision  30-1500μm

Design pressure 

1.0MPa(Higher pressure can be customized.)

Design temperature 

0-200°C(It depends on seals.)

Single filtering area 

0.14m2-1.45m2

Cleaning Pressure Drop 

0.05MPa

DP controller

Differential pressure transmitter or differential pressure switch

Gear motor 

Three-phase power, 380V, protection grade IP55; Turbine worm reducer

Connection Standard 

Flange, HG20592-2009(Standard), HG20615-2009( ANSI B16.5 Compatible)

Filter elements 

V-shaped wadge net/ sintered mesh

Filter element material

304/316L/2205/Titanium

Housing material 

304/316L/CS

Brush material 

Nylon/stainless steel

Housing seal material 

NBR Nitrile Rubber(Standard)/viton (FKM) fluoro rubber

Discharging valve

Pneumatic ball valve, protective grade IP65

Facility supply  380V AC, 0.4-0.6MPa Clean and dry compressed air

Equipment main parameters and dimensions

Filter main model AFB14 AFB28  AFB42   AFB77 AFB116  AFB145
Filtering area (m2) 0.14 0.28 0.42 0.77 1.16 1.45
Import and export size  DN20-DN50   DN50-DN80  DN50-DN100 DN65-DN100 DN80-DN125  DN100-DN150
Outlet size DN40 DN40  DN50  DN50  DN50   DN50
Cylinder diameter 273 273 273 460 550 550



For more product information, please consult technical engineer,Tel:15216604123



XML 地图 | Sitemap 地图